Web spray contact adhesive

TensorGrip® F60 non-chlorinated foam and fabric spray adhesive

A non-chlorinated spray adhesive for bonding foams, fabrics and upholstery materials to common core substrates.

Its high tack suits thick fabrics, thick foams and other demanding materials where good grab is needed.

Order

Technical data

Application2 sided
Viscosity300 cps +/- 50 cps
Total solids30.0% +/- 2.0%
ColourClear or Green
System flammabilityFlammable adhesive in a flammable propellant
Shear832N
90° peel (6.25 sq.cm)25N
Shear adhesion failure temperature (SAFT, 100 g)> 80°C
Heat resistance (25 mm / 100 g)> 95°C
Flash-off2 - 4 minutes, depending on temperature and humidity
Open timeUp to 30 mins
Full cure24 hours
Coverage, 22 litre canister80 m²
Shelf life18 months from date of manufacture

Figures as printed on the manufacturer's technical data sheet, V1.0 - 10.2022. Test methods are as the sheet states them. Technical data sheet (PDF)

What it bonds

  • Foam
  • Thick fabrics
  • Upholstery materials
  • Leather
  • Most hard plastics
  • Sheet metal

Not recommended for

Plasticised vinyls, flexible plastics, PE or PP.

Test on your own substrates before production use.

Not sure it suits your substrates or your line?

Tell us what you are bonding and how it is made, and we will talk it through.

Talk to us

Other products in this range