Tape and Adhesive Calculators
Seven tools that work a result out from your own figures: how many parts a roll will bond, what bonding costs against screws or rivets, which tesa grade holds your two materials, what a tesa log costs slit to your width, which grades tesa rates for your temperature, which masking tapes tesa rates for your oven cure, and how far two bonded materials move as the temperature changes. For anything load-bearing, speak to us with your load case and substrates — see below for why we do not publish a bond-area figure.
Why we will not give you a bond area from a load
It is the question we are asked most, and it is the one figure we will not put a number on in public. Here is the honest reason.
A bonded joint carrying weight is loaded in shear. Across every one of tesa’s published product information sheets, static shear is given as a rating — low, medium, good, very good — at 23 °C and 40 °C. There is no hold time and no load figure anywhere in them.
What tesa does publish as a number is peel adhesion, in N/cm. Peel and shear are not interchangeable, and a bond area worked out from a peel figure is a guess wearing a decimal point. The grade, the substrate, the surface preparation, the temperature, the duration of the load and whether it is steady or shock-loaded all change the answer.
What we can do is work it out with you — against your real load case, your substrates and your process, and with a physical trial before anything is signed off. That is what the trade desk is for, and it is free.
Talk to the trade desk about your load case Simulation and FEA support →
1. Tape Yield Calculator
Calculate how many parts you can bond from a single roll, and the tape material cost per part. Useful for procurement planning and total cost comparisons. Pair with the adhesive selection guide to confirm you have the right product before calculating volumes.
2. Fastener vs Tape Cost Comparison
Compare the true cost of mechanical fixing against structural tape per assembly. Includes material, labour, and — optionally — annual volume to show full-year saving. See the replacing traditional fasteners guide for application context and the structural case beyond cost.
3. Adhesion by Substrate Pair
Which tesa grade holds your two materials, and what the joint is actually worth — because a joint is worth its weaker face. 161 grades, tesa’s own published peel figures, for any pair of eleven substrates: steel, aluminium, ABS, PP, PE, PC, PET, PVC, PS, glass and PMMA. Open the substrate adhesion comparator →
4. Tape Slit to Your Width
Any tesa log cut to the width you need, from 6 mm up: rolls per log, the slitting charge and the price per roll, at our own selling prices ex VAT. 409 tesa products, 941 log sizes. Price a slit log →
5. Which Tape Takes the Heat
Enter the temperature your joint lives at and the peak it has to survive. The selector checks both against the long-term and short-term ratings tesa prints on its own product information sheets, for 111 grades we supply, and lists every grade rated for the job, most headroom first. Check a temperature →
6. Masking Tape for Your Oven
Enter your oven temperature and how long the part stays in. The selector checks both against the ratings tesa prints on its own product information sheets — a temperature for 30 or 60 minutes — for 35 masking tapes we supply, and lists every one rated for your cure, most headroom first. Check an oven cure →
7. How Far Two Bonded Materials Move
Enter the two materials, the bonded length and the coldest and hottest the joint sees in service. The calculator gives how far the two parts move against each other, as a range from the published figures for both materials, for 17 materials from aluminium and steel to plastics, glass and timber. Work out a joint’s movement →
The Seven Tools at a Glance
| Tool | You enter | You get |
|---|---|---|
| Tape yield | Roll width and length, bond area per part, roll cost | Parts per roll and tape cost per part |
| Tape against screws and rivets | Fixings per assembly, seconds per fixing, labour rate, cost per fixing, tape cost and application time, assemblies a year | Cost per assembly each way, and the full-year difference |
| Adhesion by substrate pair | The two materials you are bonding | tesa grades ranked by the weaker face, from tesa’s own peel figures |
| Tape slit to your width | A tesa product, a log and a finished width | Rolls per log, slitting charge, price per roll, ex VAT |
| Which tape takes the heat | A continuous temperature, a peak, or both | Every grade tesa rates for the job, with the headroom |
| Masking tape for an oven cure | An oven temperature and the time in the oven | Every masking tape tesa rates for that long, at that heat, with the headroom |
| How far two bonded materials move | Two materials, the bonded length, the coldest and hottest in service | The movement between the two parts, end to end and at each end |
Related Pages
Choosing the Right Adhesive
Before you use any of these tools, confirm you have the right product. Structured decision guidance by substrate, load type, and environment.
Replacing Traditional Fasteners
The full engineering and commercial case for converting mechanical fixings to structural tape — beyond what the cost calculator captures.
Simulation and FEA Support
When you need more than indicative values — verified material models, cohesive zone data, and joint design review for structural applications.
Request a Technical Trial
Move from calculator output to validated physical result. We supply matched samples with surface prep guidance and trial plans.
Need a More Detailed Analysis?
These tools give indicative values under idealised conditions. For production specification, DIN 2304 compliance, or structural sign-off, speak to our team directly with your load case and substrate details.
Guidance only. Results from these tools are general recommendations based on figures you supply. They are not a guarantee of performance in your application. You must decide whether a product is suitable for your intended use: test a sample under your own conditions and check the tesa product information sheet. Supply is subject to our Standard Terms and Conditions of Sale, including clause 8 (suitability for use). If you’re unsure, our technical team will be glad to help.