tesa Platinum Partner · Stencil Material for Sandblasting, Protection and Reinforcement

tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement

Stencil Material for Sandblasting, Protection and Reinforcement. Available in 6 widths and 1 colour — held in UK stock, cut, boxed and shipped from Worthing. Bulk and non-standard runs are a conversation, not a dead end.

Backing: flat paperAdhesive: natural rubberTotal thickness: 670 µmTensile strength: 180 N/cm

Authorised UK tesa distributor · In stock · Ships from Worthing, UK

tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement — tesa, Austen Direct

You don't just want a roll of tape. You want a clean paint edge, no bleed, and a tape that comes off without a fight or a residue — at the temperature your process runs.

So which problem are you solving? tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement comes in 6 widths (15mm, 19mm, 50mm, 450mm, 500mm, 950mm). tesa builds it; we cut it, box it and get it to you. Odd width or run length? That's a call to the trade desk, not a dead end.

* Protection of car parts during professional lacquering work* Perfect adhesion even on difficult surfaces* Suitable for reinforcement of uppers* Grinding and sandblasting

Perhaps we can help.

Why specify it

Key features

  • Strong and thick paper backing for very good durability during grinding or sandblasting applications (50 sec./4bar)
  • Excellent plottability, paint anchorage and resistance to temperatures up to 100°C
  • Good adhesion to various surfaces, clean removal

Choose your variant

7 variants, one spec

Every variant below is the same tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement — pick the width and colour your job needs. Price and stock sit on each variant page.

The detail

Technical specification

Backingflat paper
Adhesivenatural rubber
Total thickness670 µm
Tensile strength180 N/cm
Elongation at break6 %
Adhesion to steel3.5 N/cm
Usable width950 mm
Country of originDE
Available widths15mm, 19mm, 50mm, 450mm, 500mm, 950mm
Available coloursYellow
Variants stocked7
DatasheetDownload tesa PI sheet (PDF) ›

Questions

Common questions

Where can I buy tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement in the UK?

tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement is held in UK stock by Austen Direct, a tesa Platinum Partner based in Worthing. Order online per variant, or call the trade desk on 01892 832141 for bulk and cut-to-width.

What sizes and colours does tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement come in?

7 variants — widths 15mm, 19mm, 50mm, 450mm, 500mm, 950mm. Non-standard widths can be slit to order.

What is tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement used for?

Stencil Material for Sandblasting, Protection and Reinforcement. * Protection of car parts during professional lacquering work* Perfect adhesion even on difficult surfaces* Suitable for reinforcement of uppers* Grinding and sandblasting

Can I order tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement in bulk or cut to width?

Yes. Austen Direct supplies trade quantities and can cut to width off the roll. Tell us the job and volume on 01892 832141 and we'll confirm the right grade.

More in Masking

Bulk requirement, odd width, or a line that needs testing?

Most of our customers don't order off a page — they pick up the phone and we work the spec out together. Tell us the job, the volume and the width, and we'll confirm tesa® 4434 Stencil Material for Sandblasting, Protection and Reinforcement is right or point you at the tape that is.

Talk to us about your line
Or call the trade desk: 01892 832141
Austen Instant Tapes Ltd t/a Austen Direct · tesa Platinum Partner & 3M Authorised Distributor · Est. 1965 · Worthing. Specs from tesa Core Assortment (May 2026).